Noble Shower Pro Slope

Noble Shower Pro Slope

NOTE: These were not designed for surface slopes to be tiled. These are specifically designed for sloping the rubber/PVC liner to be buried in mortar with a much thicker sloped mortar floor laid over the top of the rubber liner (burying the entire installation).

• Durable non-deteriorating EPS preformed composite
• Rated at 500 lbs. per square foot
• Available in 3 sizes and 4 extensions
• Extend or trim to fit shower configuration – light and easy to cut
• Install under a sheet membrane like Chloraloy
• Designed for use with heavy membranes and clamping drains

REQUIRES reinforced mortar bed installed over Pro-Slope/sheet membrane (generally a 1-1/4″ thick mixture of a 1:4 mix of portland cement to sand)

Pro Slope Sizes

Pro-Slope Standard

40″ x 40″,
thickness 1/8″ to 1″

60″ x 60″,
thickness 1/8″ to 1-1/4″

Pro-Slope Tub Replacement

40″ x 80″ Tub Replacement,
thickness 1/8″ to 1-7/8″

Available Extensions

Pro-Slope Flat Extensions

20″ x 40″ Flat,
thickness 1″

30″ x 60″ Flat,
thickness 1-1/4″

Pro-Slope Tapered Extensions

20″ x 40″ Tapered
thickness 1″ to 1-7/16″

30″ x 60″ Tapered
thickness 1-1/4″ to 1-7/8″